A sewage ejector pump is one of the sewage system equipment capable of moving vast amounts of sewage from low levels to higher level. This pump is usually equipped in houses and buildings with basement toilets. Due to the incapacity of toilets that are located below primary sewer line to dispose sewage matters in gravitational flow, ejectors are used.
Common ejectors have one pump, a float and an optional backup pump. It is located in the tank’s interior and is linked by the tank’s discharge pipe to a public sewer line. More often this is powered by electricity. Like sump pumps, these also have alarm system that signals the owner if pumping failures occur. Other systems utilize grinders that pulverize sewage making the flow of manure smoother.
How does sewage ejector pump work and what causes damage?
For houses and structures without gravitational draining system, sewage ejector pump is essential to emulsify solid wastes before pumping them to the public sewer lines. Tanks have limited storage capacity; therefore, when sewage matters reach a certain level inside the tank, the ‘float’ rises. This float triggers the pump to operate and makes pumping continuous. After the float falls down, the ejector automatically switches off.
In bathrooms, ejector pumps are large holes located on floors where pumps will accumulate wastes from plumbing fixtures and act differently from jet pumps. These waste materials will then be pushed up to drains and will be ejected from plumbing systems. However, this process is not as easy as it seems. Odor is a major nuisance that homeowners and building occupants shall deal with.
Other than that, damages may also be acquired by ejectors. Flushing items such as cotton swabs, diapers, napkins, condoms, papers, and other non-biodegradable materials will greatly affect the process of pumping. This may cause leaks, clogging and other sewage troubles.
How to fix a problem on sewage ejector pump?
Problems may cause grave health cautions as well as life nuisance. Therefore, finding solutions to the problem will eliminate sewage mishaps. Calling expert sewage pumping team will assist in making things work properly. However, if an owner wants to check the problem first before consulting to on-call service providers, below are some areas to check:
First thing to check are the ejector’s vent. This is connected from the tank to public sewer lines. Common problems occur in this area especially when signs are characterized by recurring odors. Odors mean that the vent is blocked and shall be cleaned.
Pits also have lids usually with rubber seals. These seals are put in the discharge pipe as well as the vent line. When checking this area, be certain that pumps are unplugged. If seals are damaged, unpleasant odor will be smelled. Thus, this calls for repair or seal replacements.
If severe problems are continuously occurring, it is best to call the help of licensed sewage system repair services, not the water pumps repairer. They have received training in analyzing, verifying, and solving problems present in the sewage system. Also, some areas are hazardous to be checked by someone who has no appropriate gear, expertise and equipment. Calling for help will ensure that any sewage ejector pump troubles will be solved in correct way in an immediate time.
